machine manufacturer & steel building constructor

news

K Span Roll Forming Machine (Safety Precautions)

Update:27 Sep 2018
Summary:

Safety Precautions for the Using of K Span Roll Forming […]

Safety Precautions for the Using of K Span Roll Forming Machine

According to the regulations, the electrical equipment shall be inspected and maintained on time, and the unused electrical equipment lines shall be completely removed. When the department is out of power, when it is less than 0.9 meters away from the electrical quantity inspection staff, dry wood rubber or insulation material shall be used for reliable temporary obstruction.

When the conductive parts of the mechanical parts of the pressure tile are grounded, before the power is cut off, except for those who rescue the electric shock, they will not agree to approach, and leave the nearby 4 meters, leaving the room 1.8 meters away from the strut voltage damage. When repairing the equipment of the pressing machine, pull down the switch and the knife. It is necessary to hang the warning sign "No closing, some people working" at the switch and the knife. On the covered fence of the charged equipment and the aisle where the passage is prohibited. Warning signs such as “stopping, high-voltage danger” should be affixed, and the warning sign of “someone working here” should be hung at the workplace.

The electrician must know the type and function of the electrical circuit and electrical equipment in the workshop. The function of the electrical equipment is not fully understood, and it is forbidden to take risks. The electrician should check the condition of cables, motors, electric consoles and other equipment on a daily basis. If problems are found during the inspection, they must be dealt with in a timely manner. When checking the motor temperature, first check the power and then test it with the back of the hand.

Except for the temporary construction electricity or temporary measures, the temporary electric wires are not allowed to be agreed, the switches and sockets are not allowed to be hanged, the instrument tools and the welding machine are safely applied, and the original. The equipment must be connected to a safe ground.

Copyright © Yingkou ChangSheng Steel Structure Project Co., Ltd .All rights reserved

Created by:HWAQ