machine manufacturer & steel building constructor

news

How Roll Forming Machine Can Be Used for a Long Time

Update:12 Oct 2018
Summary:

How to use the roll Forming Machine can be used for a l […]

How to use the roll Forming Machine can be used for a long time. The first thing we have to do is to pay attention to the maintenance manual of the roll forming machine. It is good for the pressing machine every day. We should stick to it every day.

Firstly, the surface of the K Span Machine should be cleaned. The upper die stamping process of the machine: the motor passes the pulley, drives the input shaft, drives the upper shaft through the pinion and the large gear, and drives the sliding seat with the upper mold through a set of cam mechanism. Move up and down to achieve roll forming machine.

The indexing of the table is carried out by the gear set mounted on the upper end of the shaft, the transmission pin gear, and the groove wheel mounted on the hexagonal wheel shaft to realize the indexing positioning, and the two ends of the shaft of the pressure washer are respectively installed. A return cam conjugated to the pressing cam mounted on the same shaft, the positioning of the lower mold in the working position is achieved by the positioning rod and the positioning disc. Lubrication pumps are installed in the left and right sides of the cabinet, and the oil is delivered to the frictional moving parts when the machine is working. Those who understand the structure and performance of the machine and the operating procedures must not start the machine.

It is forbidden to work above the minimum closing height of the pressing machine, that is, the minimum distance from the bottom surface of the upper sliding box to the working surface is 290mm, and the height after the upper and lower molds is added. The thickness of the upper and lower pads plus the thickness of the blank is not allowed to exceed 290mm. The mold should be designed according to this requirement to avoid machine accidents. Always pay attention to the height of the lubricating oil in the sliding case and the sides of the machine. The roll forming machine should be wiped frequently, kept clean, and no muddy water.

Copyright © Yingkou ChangSheng Steel Structure Project Co., Ltd .All rights reserved

Created by:HWAQ